BONNETHEAD X2P
Dual 1.0" Plunger Tube Variant
Description
The Bonnethead X2P is a dual-barrel expansion of the Bonnethead platform built around two 1.0" ID plunger tube systems with staged-trigger firing. It offers increased shot capacity in a compact layout while keeping the spacer-driven Bonnethead frame style and reduced hardware profile. The system supports lightweight front-end components and delivers sequential control without altering the core platform.
Advanced Builders Recommended
This blaster is more of a "can we" instead of "should we" scenario. Don't expect it to work perfectly and be patient with priming things when it gets stuck. It is very difficult to prime if you put in powerful springs, I find that the springs out of rival blaster work the best. So don't expect crazy power but if you like the gimmick I would recommend! Double Bonnethead!!!
Hardware Kit
Part |
McMaster # |
Qty required (+ Thresher Hardware) |
|---|---|---|
| 10-32 threaded rod (3ft) | 98838A011 | 1 x 3" |
| Catch Washer | 7421K12 | 1 |
| 1.5" OD washer | 92141A035 | 1 |
| K25 (11") (5.5" piece) | 9637K25 | 1 |
| K26 (11") (5.5" piece) | 9637K26 | 1 |
| 1.0" ID Plunger Tube (3ft) | 53945K17 | 2 x 5" |
| Alum tube 0.509" ID (3ft) | 9390N15 | 1 x 7" |
| 1.0" OD O-RING FAT | 9452K81 | 12 |
Key Features
-
Dual 1.0" plunger tube configuration
-
Staged-trigger control for sequential firing
-
Compact spacer-based frame layout
-
Low hardware count for a two-shot system
-
Compatible with lightweight front-end configurations